The market requirement for a high-quality diamond film with exceptional cutting power and durability drove Precision Polishing to develop the new product range designated Diamond Microfinishing Film FD55.
The research and development project, started already in 2018, has been focused right from the beginning to develop a superior quality product able to perform on the most critical of applications.
Thanks to a very uniform and high-performance electrostatic coating process and to an extremely resistant resin coating on a strong 125 µm (5 mil) PET backing film with antislip backing, Diamond Microfinishing Film FD55 ensures a very fast precise stock removal rate with long life, combined with an excellent and consistent surface finish.
The current grit sizes are: 80 µm, 60 µm, 45 µm, 30 µm and 15 µm.
This covers applications requiring a coarse up to a fine surface finish.
Diamond Microfinishing Film FD55 has its own specific product colour code in order to immediately identify and select the appropriate grit size, thus eliminating incorrect selection. In addition, the grit size and batch number are printed on the backing.
The main target workpiece materials are:
Concerning the related industries, Diamond Microfinishing Film FD55 is orientated mostly towards precision machining of components manufactured for the following industries:
Solutions are also offered in the glass market for bevelling after cutting, and in the stone and solid surface markets to grind and polish.
Like every microabrasive film in the Precision Polishing product range, Diamond Microfinishing Film FD55 is converted into several product types. It is available as:
Concerning rolls, the standard dimensions available from stock are 100mm X 15mt, 100mm X 50mt and 200mm X 15mt (all with 76mm i.d. plastic core with 4 slots) with start/end sections (tails) without abrasive. All the other dimensions are available on request, also with a 26mm plastic core.
ASO (abrasive side out) and ASI (abrasive side in) winding directions are both available.
Endless belts are manufactured to customer specification and requirements.
Discs standard diameters are 150mm, 200mm, 250mm and 300mm. All the other dimensions are available up to a maximum outside diameter of 500mm.
Regarding sheets, the standard dimension is 230mm X 280mm. All the other dimensions are available up to a maximum width of 500mm.
Due to the technical features, Diamond Microfinishing Film FD55 offers the end users many benefits for improving their finishing processes. The high cutting power ensures a fast grinding action to quickly remove and improve the marks of the previous machining operation.
The very hard and resistant abrasive coating allows
In addition, the high grinding performance and efficiency allows a reduction in the processes time when compared to conventional microabrasive film used in sequence.
To discover more informations, click here clicca qui