PSA Microfinishing Film is a product group where the microabrasive film backing is self-adhesive, as opposed to plain PET film.
The combination of the self-adhesive backing and microabrasive film, provides the user with a high-quality finishing solution on a wide variety of materials such as metals, composites, fiberglass, glass, paint, plastic and solid surfaces. PSA Microfinishing film is used both off-hand and in-conjunction with specialised machines in several markets where a consistent and fine finish is required.
PSA is the abbreviation for Pressure-Sensitive Adhesive and is also commonly known as “self-adhesive” or “self-stick”. PSA is a type of non-reactive adhesive, which forms a bond when pressure is applied. It allows PSA Microfinishing Film to be easily used with the following main benefits:
Focusing on the abrasive surface, microfinishing films are defined as electrostatic coated microabrasive films, where the abrasive grains are electrostatically oriented and fixed between 2 layers of resin (base coat and top coat) to the PET backing film. This process ensures a consistent and homogenous grain orientation, which provides a fast and precise cutting action. In addition to this process, the microabrasive powder is strictly controlled to ensure only the correct grain size is used in the production i.e. removal of any larger or smaller grain sizes.
Precison Polishing offers three product series as PSA Microfinishing Film. Variations depend on the mineral (aluminium oxide or silicon carbide), the grit range, and the thickness of the backing film required.
Diamond is the hardest mineral available, so it’s dedicated to all the critical microfinishing operations that cannot be performed with the other abrasive minerals such as the finishing processes of carbides, ceramics, harder metals, stones and glass.
Then, when to use Silicon Carbide or Aluminum Oxide?
Below is an example of the grain structure:
FA35 PSA Microfinishing Film is a standard product available from stock. FA50 and FS50 are available on request i.e. special production.
Comparing FA35 and FA50. FA35 has a thinner film, thus producing a more flexible product, which is suitable for applications where the microabrasive film must be attached to an uneven surface. FA50 offers a wide grit range from 5 to 100 microns, where the coarser grits (50 to 100 microns) are suitable for aggressive grinding applications.
PSA microfinishing Film is most commonly supplied in disc or sheet form to be used for flat sanding applications.
PSA microfinishing film is often compared to traditional coated abrasive papers and cloths, which use different grit size standards such as FEPA (Europe), ANSI (America) or JIS (Japan).
Below is a comparison table between the grits of PSA Microfinishing Film and the other grit measurement standards:
To check the full grit comparison chart, click here
Discs are used on rotary machines in the metallurgy sector for surface preparation, or industrial flat lapping applications. Within the metallurgy sector, our products provide an excellent grinding consistency and can achieve a “pre-mirror” finish using our complete grit range.
For polishing products please click here
The standard disc diameters are: 200mm, 203mm, 230mm, 250mm, 254mm, 300mm and 305mm.
Other diameters are available on request, up to a maximum diameter of 350mm. Larger diameters may also be accommodated.
A highly specialized niche market where this product is utilized is CD rom matrix stamper finishing applications. Precision Polishing provide its customers with PSA discs in roll form in their required diameters (i.e. 55mm or 30mm). These are supplied ready to be easily applied on the finishing machine, where the surface finish on the matrix is of paramount importance.
PSA microfinishing sheets are usually used off-hand. The PSA sheet is positioned on a flat rigid surface (holder), and the sanding operation is applied using a smooth and fluid movement over the abrasive surface. Main applications are found in precision mechanical industries such as the valve seat rings and the watch industries. They are also used in the jewelry market and in musical instrument manufacture and repair.
The standard sheet size is 230 x 280mm.
Other dimensions are available on request.
Maximum width of 350mm and maximum length of 1m (over 1m it must be supplied as a roll).
Larger widths can also be accommodated.
Rolls are available on request. This product is suitable for users or converters that will carry-out a second step e.g. additional converting process.
PSA microfinishing film is also used in the textile industry. The PSA microfinishing film is wound onto the surface of the grinding cylinder which produces a very precise and consistent cut of the textile surface, far superior than coated abrasive options.